Hover on the image to zoom

GM Diesel CAN, General Motors

239.00 $
Module for reading and writing through OBD2 connector by CAN-bus ECUs used in diesel GM vehicles (Opel, Chevrolet, Saab, Holden).

Description

ID, R, W, CS

FID: 18, 19, 20, 21 GPEC2 29bit, GPEC2A
Software module for OBD2 working with FCA group vehicles (Chrysler/Dodge/Jeep/Fiat) with ECUs Continental GPEC2 LOCKED, GPEC2A, GPEC3.

This ECUs are used on normal aspirated petrol cars from 2013 and have internal protection from tuning (LOCK).

For success MOD file writing it needs to remove protection (ECU Unlock) in BSL mode. You will need to open ECU and connect it on the bench as shown in connection manual.

This is the world first solution with no need to send ECU to any workshop for PCM modification. All you can do by yourself.

Module allows this operations:

Identification and getting LOCK status (LOCKED/ UNLOCKED)
OBD2 FULLFLASH reading
OBD2 EEPROM reading
ECU Unlock in BSL mode
OBD2 Calibration area writing
OBD2 EEPROM writing
Read and clear DTC

At this moment we support this ECU types:

Continental GPEC2 2013+ MPC5566 3Mb (FID: 20)
Continental GPEC2 2015+ MPC5566 3Mb (FID: 21)
Continental GPEC2A MPC5764 4Mb (FID: 19)
Continental GPEC3 MPC5764 4Mb (FID: 18)

Attention! UNLOCK function is not working now with all J2534 adapters. Currently we tested and guarantee correct unlock with CarDAQ Plus, Bosch VCM2, Mongoose (excl. ISO).

Unlock does not work with Tactrix OpenPort 2.0, Chipsoft J2534, SMS Soft Dialink.FID: 65, 67, 85, 90

Module for reading and writing through OBD2 connector by CAN-bus ECUs used in diesel GM vehicles (Opel, Chevrolet, Saab, Holden).

GM Bosch EDC16C39 HW1 (FID: 65)

ECU is based on MCU Motorola MPC562 with external flash memory 2.0Mb.

Allows to read and write calibration area through CAN-bus with checksumm correction on writing.

Supported vehicles:
Chevrolet Captiva 2.0 VCDI
Chevrolet Cruze 2.0 VDCI
Chevrolet Epica 2.0 VCDI
Chevrolet Lacetti 2.0 VCDI
Daewoo Winstorm 2.0 VCDI
Opel Antara 2.0 CDTI
Opel Astra (H) 1.9 CDTI
Opel Combo (D) 1.6 CDTI
Opel Signum 1.9 CDTI
Opel Vectra (C) 1.9 CDTI
Opel Zafira (B) 1.9 CDTI

GM Bosch EDC16C39 HW2 (FID: 67) – Bench OBD only

ECU is based on MCU Motorola MPC562 with external flash memory 2.0Mb.

Allows to read and write calibration area through CAN-bus on the bench with checksumm correction on writing.

Supported vehicles:
Chevrolet Trailblazer II 2.8TD Duramax
Holden Colorado 2.8TD Duramax

GM ACDelco E87 (FID: 90)

ECU is based on MCU Motorola MPC5565 with internal flash memory 2.0Mb.

Allows to read and write calibration area through CAN-bus on the bench with checksumm correction on writing.

GM ACDelco E98 (FID: 85)

ECU is based on MCU Motorola SPC5764 with internal flash memory 4.0Mb.

Allows to read and write calibration area through CAN-bus on the bench with checksumm correction on writing.

Additional information

Software

BitBox

Make

Chevrolet, GM

Reviews

There are no reviews yet.

Be the first to review “GM Diesel CAN, General Motors”

Your email address will not be published. Required fields are marked *

Scroll